BMRYN - ADHESIVE CLEANER, 82375
- MSDS: BMRYN
- Manufacturer: NORTON CO
- Product Name: ADHESIVE CLEANER, 82375
- National Stock Number: 6850-00N027562
Product Identification
Product ID:ADHESIVE CLEANER, 82375
MSDS Date:03/01/1991
FSC:6850
NIIN:00N027562
MSDS Number: BMRYN
Responsible Party
US
Emergency Phone: 518-266-2200
Info Phone: 518-266-2200
Cage: NORTN
Contractor
Telephone: 518-266-2200
Cage: NORTN
Ingredients
XYLENE
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 65%
OSHA PEL 100 PPM;150 STEL
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
VM&P NAPHTHA
CAS: 64742-89-8
Fraction By Weight: 35%
OSHA PEL 300 PPM;400 STEL
ACGIH TLV: 300 PPM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DO NOT BREATHE VAPOR.
ANESTHESIA, HEADACHE, NAUSEA, DIZZINESS. SKIN: LIQUID SLIGHTLY
IRRITATING TO SKIN. EYE: LIQUID SLIGHTLY IRRITATING TO EYES.
INGEST: NO APPLICABLE INFO FOUND. INGESTIO N NOT RECOMMENDED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE PERSON TO FRESH AIR AND RESTORE BREATHING
IF REQUIRED. INGESTION: DO NOT INDUCE VOMITING. OBTAIN FIRST AID OR
MEDICAL ASSISTANCE IF NEEDED. SKIN: REMOVE LIQUID FROM SKIN WITH
SOAP A ND WATER. GET MEDICAL ATTENTION IF NECESSARY. EYE: FLUSH
EYES WITH WATER FOR AT LEAST 15 MINUTES. OBTAIN MEDICAL ASSISTANCE
IF NEEDED.
Fire Fighting
Flash Point Method:TOC
Flash Point:63.0F,17.2C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MAY FORM FLAMMABLE AND/OR EXPLOSIVE
MIXTURES WITH AIR IF IGNITED.
Accidental Release
Spill Release Procedures:DIKE LARGE SPILLS. FOR SMALL SPILLS, SOAK UP
AND PLACE IN SEALED CANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID OPEN FLAMES AND SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION.
Other Precautions:AVOID SPLASH-FILLING. AVOID EXCESSIVE HEAT. DO NOT
BREATHE VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLY MASK IN AREAS
OF CONCENTRATED VAPORS.
Ventilation:LOCAL EXHAUST DESIRABLE. MECHANICAL EXHAUST AT FLOOR LEVEL.
VAPORS ARE HEAVIER THAN AIR.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NO APPLICABLE INFORMATION FOUND.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:250F,121C
Vapor Pres:20 @ 68F.
Vapor Density:3.8
Spec Gravity:0.79 @ 60F
Evaporation Rate & Reference:1.3
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID WITH SOLVENT ODOR.
Percent Volatiles by Volume:98
Stability
Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
WHEN COMBUSTED.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.